Tel - 028.350.55209
Tinsley việt nam EN
Tinsley việt nam EN

MO-5898-100A Portable Digital Micro-ohmmeter

Features
  • Alphanumerical display
  • Resolution: 0.1 µΩ
  • Resistance reading: up to 200 Ω
  • Up to 100 A test current
  • Kelvin-type (4-wires) measurement
  • Powered by internal battery (up to 10 A) or mains supply Direct reading (Up to 4½ digits)
  • Overheating Protection
  • USB interface
 
For more information contact Tinsley
 
MO-5898-100A Portable Digital Micro-ohmmeter

General

The MO-5898-100A high current micro-ohmmeter employs the 4 terminals-method to avoid measurement errors caused by test leads and their contact resistances. Resistances readings are shown in the alphanumeric display with up to 4½ digits-resolution. It allows to measure resistances up to 200 Ω, with a resolution of up to 0.1 µΩ.
 
Using its internal rechargeable battery, measurements with up to 10 A test current may be carried out without connecting the equipment to mains power. Powered by to mains power, it allows to measure with any test current up to 100 A.
 
Measurement accuracy is guaranteed by an state-of-the-arts signals amplification system, offset-free and of high long-term stability.
 
Test current may be adjusted by the operator in every one of the scales and their values are measured using an analogue indicator (bargraph), making it easy to measure resistances with a significant inductive component, as in the case of big transformers windings.
 
The high-current generation system is based on modern technology that allows to significantly decrease both its weight (14 kg) and size. The cabinet is made of plastic material highly resistant to impacts and to environmental challenges.
 
Internal thermal sensors in all sensitive components avoid any damaged caused to the instrument due to overheating.
 
This is a strong but lightweight equipment, and may be easily carried by one person. It is water-resistant and can be used under severe weather conditions offering an excellent performance working both in the laboratory and out in the field.
 

Specifications

 
TEST CURRENTS
1 mA, 10 mA, 100 mA, 1 A, 10 A, 100 A.
Each current may be continuously adjustable from 0 to 100%.
 
RESISTANCE RANGES
Current Range Resolution
100 A 0-199.9 µΩ 0.1 µΩ
100 A  0-1999 µΩ 1 µΩ
10 A 0-1999 µΩ  1 µΩ
10 A 0-19.999 mΩ  1 µΩ
1 A 0-19.99 mΩ 10 µΩ
1 A 0-199.99 mΩ 10 µΩ
100 mA 0-199.9 mΩ  100 µΩ
100 mA 0-1999.9 mΩ  100 µΩ
10 mA 0-1999 mΩ 1 mΩ
10 mA 0-19.999 Ω 1 mΩ
1 mA 0-19.99 Ω 10 mΩ
1 mA 0-199.99 Ω 10 mΩ
For each test current, ranges are automatically selected for optimal reading.
 
MEASUREMENT PRINCIPLE
Four-terminal, Kelvin-type.
 
CONTINUOUS OPERATION TIME
At 100 A this equipment may be used continuously for aprox. 15 minutes before the thermal protection activates.
At 10 A or less, there is not a limited time for continuous operation.
 
BASIC ACCURACY
R < 0.5 mΩ: ± (0.50% of reading + 2 ULSD*).
R ≥ 0.5 mΩ: ± (0.20% of reading + 2 ULSD*).
* Units of the Least Significant Digit.
 
ADVANCED FEATURES
Digital direct reading of very low resistances in the alphanumerical display, with up to 4½ digits. Very fast and accurate measurements.
 
TERMAL PROTECTION
Protects all sensitive components, avoiding any damage due to overheating.
 
ENVIRONMENTAL
IP54 with closed lid.
 
SAFETY CLASS
Meets the requirements of IEC 61010-1.
 
INTERFACE
USB.
 
POWER SUPPLY
Mains or internal battery powered.
Internal battery: rechargeable, sealed lead-acid (for up to 10 A test current).
Mains supply*: 100-130 V~ or 220-240 V~ (for up to 100 A test current).
*The option must be indicated on the order.
 
BUILT-IN BATTERY CHARGER
For 100-130 V~ or 220-240 V~ mains supply.
 
OPERATING TEMPERATURE RANGE
-5 °C to +50 °C.
 
STORAGE TEMPERATURE RANGE
-25 °C to +70 °C.
 
HUMIDITY RANGE
95% UR (non condensing).
 
EQUIPMENT WEIGHT
Approx. 14 kg.
 
DIMENSION
502 x 394 x 190 mm.
 
AVAILABLE ACCESSORIES
2 Combined current and potential leads for 10 A. 2 Combined current and potential leads for 100 A. 1 Power cord. 1 USB cable. 1 User guide. 1 Case for the accessories.