SUBMARINE CABLE TEST

Portable Short-Haul Submarine Cable Test Set Model 5910

The Tinsley 5910 is a portable Short Haul Submarine Cable Test Set that brings the latest technology to the tried and tested DC methods of cable fault location.

Short Haul Submarine Cable Test 5910R

The Tinsley 5910R is a rack mount version of the 5910 portable Short Haul Submarine Cable Test Set.

Electroding Generator 5915

The Tinsley Electroding Generator, type 5915, has been developed with British Telecom to locate Submarine Telephone Cables.

Electroding Detector 5916

The Tinsley 5916 Electroding Detector is the ideal equipment for use on board ship when the electroding method is employed for the detection of submarine cables buried or laid on the sea bed.

Beach Probe and Battery Powered Portable Electroding Detectors 5917 and 5918

The 5917/5918 Electroding Probe and Detector system is a high gain low frequency selective Receiver/Amplifier to detect the electromagnetic field from a submarine cable energised by the Tinsley 5915 Electroding generator or similar.

Cable Termination Unit 5941

The Tinsley 5941 CTU is the ideal termination unit for non-repeatered submarine cables. It offers a simple method of selecting an open or short circuit condition and a safe means of discharging the cable.

Long Haul Submarine Cable Test Set 5903

The Tinsley 5903 Long Haul Submarine Cable Test Set brings the latest technology to the tried and tested DC methods of cable fault location for both repeatered and un-repeatered systems.

Submarine Cable Survey System 5930/5931 Mk II

The Tinsley Submarine Cable Survey System is designed for use by divers working in areas where it may not be practical to use an R.O.V.. With a low frequency electroding tone applied to the cable, the system can be used to locate cables buried beneath the seabed and to establish their burial depth.